Update history DMM-ProfiLab 3.0

-----------------------------------------------------------------------

Latest Update:

08/23/2006
- No connection with DMM VC6x0. Solved.

Notice: Since a new ProfiLab version is released in August 2006, 
new hardware devices will no longer be implemented into version 3.0
in future, but into version 4.0 only.

-----------------------------------------------------------------------

06/19/2006 Switch/Button: Active area reviewed

04/19/2006 No connection to DMM ME-42, ME-32, ME-22, MAS345. Solved.

04/06/2006

- Problems solved opening several HygroSens USB devices simultaneously.

03/21/2006
- New hardware: METEX Multimeter MS-1280
- Formula problem solved.

01/23/2006
- New hardware: Voltcraft Anemometer AN-80

11/16/2005
- Multimeter VC 9x0 @USB hangs. Problem solved.

10/31/2005
- DMM VC960, 920, 840, 820 @USB via Voltcraft adapter (Conrad 12 15 98)

10/10/2005
- New hardware: Voltcraft DMM VC 920 and VC 960 (RS232)
- New hardware: Voltcraft lux meter LX-1108

08/09/2005
- Formula: Error raising zero to a higher power. Solved.
- Conrad relay card: Input output mismatch. Solved.
- Numeric input: Font size now set correctly.

06/13/2005
- Missing hints on front-panel since update from 05/25/2005 - solved.
- No connection to serial devices since update from 05/25/2005 - solved.

05/25/2005
- Internet information links for hardware devices
- auto-fade for frontpanel toolbars

04/05/2005
- Reduced processor power consumption with optional simulation at low speed

03/14/2005
- Solved: Integrator "hangs" after RESET.
- Solved: ELV-M232 / ME-8100 can not be configured for output.
- Solved: Y(t) plotter fails to load older GRF files.

02/22/2005
- Counter: Z output not syncronized with count on start. Solved.

01/06/2005
- New hardware: LCD displays with HD44780 controller and compatibles on LPT
- Integrator: Improved behaviour on reset

11/17/2004
- Some front panel elements loose width/height when saved: Problem solved.
- Automatic update function simplifies download and installation of future updates.
- Improved control for data recorder (see manual)

10/11/2004
- New multimeter UNI-T UT60E

07/06/2004
- New hardware component for relay card "Quancom USBREL8".
- Improved accuracy of monoflop timing

05/10/2004
- "Formula" and "Remember last setting" improved.

04/13/2004
- New hardware component for "HygroSens USB relay card REL8HC-IN8-USB".

03/23/2004
- Improved mean value component.
- Wrong switches focussed in some cases: Bug removed.

02/23/2004
- New hardware component for "Velleman relay card K8056".
- Multimeters "MAS-345" and "DT4000ZC" now supported.
- Faulty timing of y(t)-plotter with sampling rate<50ms: Bug removed.
- Incorrect display of max. measurement time for y(t)-plotter: Bug removed.

02/04/2004
- Opional component hints
- Formula component does not recognize inputs higher E9: Bug removed.

01/14/2004
- Problems with ROM component solved
- No more crashes when components are deleted
- CONRAD relay card now running under Windows XP
- Components disconnect from cicuit when properties are edited: Problem solved.

12/16/2003
- New front panel component for ASCII input
- Problem of missing focus of some switch types solved

12/09/2003:
- Relay component also as two output type available
- Missing dialogues of some new components added